#ANTEC H2O 920 SOFTWARE DOWNLOAD INSTALL#
#ANTEC H2O 920 SOFTWARE DOWNLOAD WINDOWS 7#

If they do not line up, then make sure the screws are in the correct holes in the blue inserts. From the top of the motherboard, set the retention ring down over the four threaded inserts that are protruding up from the back of the board. For the 1155 socket these were the inside holes closest to the retention ring. This is important: Thread the four screws through the proper hole on each of the blue inserts until they rotate freely and the threads are exposed. If you pick up the retention ring by the notched locking ring, the inserts should hang down from the slots.

#ANTEC H2O 920 SOFTWARE DOWNLOAD INSTALL#

All the tape does is secure the backplate while you are installing the retention ring.ДЇor the 1155 socket, install the blue inserts into the retention ring with the locking clips toward the center of the ring. Once the inserts fit, install the double sided tape to the smooth surface of the backplate and re-install the backplate to the back of the motherboard. If any threaded insert does not line up, then re-check that the insert is in the proper backplate hole for your socket type. Do not worry about the arrangement looking symmetrical because it will appear misaligned for the 1155 socket. From the back of the motherboard, align the backplate so the threaded inserts fit into each of the four holes that would secure the OEM heat sink and fan assembly. The head of each threaded insert should be recessed into the slot provided on the backplate. For the 1155 socket use the holes marked 1156. With the numbers on the backplate facing you, insert the threaded metal inserts into the proper holes corresponding to your socket type. Install the processor in its socket according to the motherboard manufacturers instructions. Installing the retention ring and backplate: You will want these easily available later. Lay out the eight screws for the fans and the eight flat washers and put a flat washer on each screw. For the Intel 1155 processor we used the blue inserts, wider retention ring and the wider backplate. Start by laying out all the parts you need for the processor type you are installing.

#ANTEC H2O 920 SOFTWARE DOWNLOAD WINDOWS 7#

Microsoft Windows 7 Professional SP1 64-bit Thermaltake Black Widow W0319RU 850W ATX 12V v2.3, PFC Power SupplyД®VGA 012-P3-1570-AR GeForce GTX 570 Video Card Western Digital Caviar Black WD7502AAEX 750GB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5вЂі Internal Hard DriveДў Cooler Master R4-S4S-10AK-GP 140mm case fans mounted in the front of the caseДЄntec Kuhler H2O 920 liquid cooling system G.SKILL Sniper 8GB (2 x 4GB) 240-Pin F3-12800CL9D-8GBSR Desktop Memory Model Intel Core i7-2600K Sandy Bridge 3.4GHz LGA 1155 95W Quad-Core Desktop Processor GIGABYTE GA-Z68XP-UD Intel Z68 ATX Motherboard LIAN LI Lancool PC-K57 Black Steel ATX Mid Tower Computer Case These instructions will assume this is a new system build so you cannot install the software first as the Antec instructions dictate. It is our hope that you will read these instructions thoroughly before beginning installation to get a vision of what you will be doing as you install your new Antec Kuhler H2O 920. We recently installed this liquid cooling system without any difficulty and wanted to share our experience with anyone it could benefit. If you have purchased an Antec Kuhler H2O 920 Liquid Cooling System and feel the instructions included with the device are not helpful, then you are at the right place. Antec Kuhler H2O 920 Installation Instructions

Antec h2o 920 software download